 |
Mixer model
Dimensions: |
 |
"Stars of Europe"
Material:
Dimensions: |
 |
Demonstrator
Material:
Dimensions: |
 |
Ring frame softener
Material:
Dimensions: |
 |
"Desert Storm" Material: coilcoated aluminium Dimensions: 150x75cm |
 |
ISO grid panel model Material: aluminium Dimensions: 40x30cm |
 |
Turbine housing Material: 1mm Nymonic 75 Dimensions: 80cm diameter |
 |
Beervessel Material: 1,5mm duplex stainless steel Dimensions: (length) 60cm |
 |
Stone panel Material: aluminium Dimensions: (length) 120cm |
 |
Bulged tube Material: 6mm stainless steel with 0,5mm copper Explosive welded after forming Dimensions: 120cm diameter |
 |
Turbine housing Material: nymonic 75 Dimensions: 80cm diameter |
 |
Bulged cone Material: 1mm nymonic 75 Dimensions: ... |
 |
Antenna disk segment Material: 1mm steel Dimensions: 1 meter |
 |
Panel Material: 1mm coil coated steel Dimensions: 1 meter |
 |
Vessel head model Material: 1mm stainless steel Dimensions: 30x20cm |
 |
Flying saucer model Material: 0,8mm stainless steel Dimensions: 25cm diameter |
 |
Window panel Material: 1mm steel Dimensions: 1,2 meter |
 |
Turbine panel Material: 4+6mm stainless steel (welded before forming) Dimensions: (length) 3 meter |
 |
Saddle shaped panel Material: 10mm steel Dimensions: (length) 1,6 meter |
 |
Turbine panel Material: 3mm stainless steel Dimensions: (length) 1,5 meter |
 |
Turbine panel Material: 3mm stainless steel Dimensions: 3 meter diameter |
 |
Car hood panel Material: 0,8mm steel Dimensions: (width) 1,4 meter |
 |
Open ring frame Material: 2,4mm AL2024T3 Dimensions: 1 meter diameter |
 |
Combustion chamber Material: 2mm Hastelloy X Dimensions: (length) 1 meter |
 |
Turbine ring Material: 2,4mm Hastelloy X Dimensions: 80cm diameter |
 |
Corner panel Material: 3mm aluminium Alcan J57S Dimensions: (height) 1 meter |
 |
Frying pan with logo Material: frying pan |
 |
Half bowl Material: 0,6mm stainless steel Dimensions: 20cm diameter |
 |
Art piece "Drops of Water" Material: 0,8mm stainless steel Dimensions: 30cm diameter |
 |
Repair part gas turbine Material: Haynes 188 Dimensions: 15cm |
 |
Prototype skin part fighter airplane model Material: 1mm aluminium zoin T3 Dimensions: 40x20cm |
 |
Heat expansion panel re-entry space vehicle Material: PM 1000 Dimensions: (width) 60cm |
 |
Turbine panel Material: 3mm stainless steel Dimensions: 1,2 meter |
 |
Saddle shaped panel Material: 1mm stainless steel Dimensions: (length) 2,4 meter |
 |
Ring Material: Superalloy Dimensions: 40cm diameter |
 |
Turbine shell Material: 1mm Nymonic 75 Dimensions: 60cm |
Copyright © 2009 Exploform BV | sitemap